Lattice Semiconductor Corporation

MachXO3 Field Programmable Gate Array (FPGA) IC 28 65536 1280 36-UFBGA, WLCSP

General Description

MachXO3™ device family is an Ultra-Low Density family that supports the most advanced programmable bridging and

I/O expansion. It has the breakthrough I/O density and the lowest cost per I/O. The device I/O features have the

integrated support for latest industry standard I/O.

The MachXO3L/LF family of low power, instant-on, non-volatile PLDs has five devices with densities ranging from 640 to

9400 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices feature Embedded

Block RAM (EBR), Distributed RAM, Phase Locked Loops (PLLs), pre-engineered source synchronous I/O support, advanced

configuration support including dual-boot capability and hardened versions of commonly used functions such as SPI

controller, I2C controller and timer/counter. MachXO3LF devices also support User Flash Memory (UFM). These features

allow these devices to be used in low cost, high volume applications such as consumer electronics, compute and storage,

wireless communications, industrial control, and automotive systems.

The MachXO3L/LF devices are designed on a 65 nm non-volatile low power process. The device architecture has several

features such as programmable low swing differential I/O and the ability to turn off I/O banks, on-chip PLLs and

oscillators dynamically. These features help manage static and dynamic power consumption resulting in low static power

for all members of the family.

The MachXO3L/LF devices are available in two versions C and E with two speed grades: -5 and -6, with -6 being the

fastest. C devices have an internal linear voltage regulator which supports external VCC supply voltages of 3.3 V or 2.5 V.

E devices only accept 1.2 V as the external VCC supply voltage. With the exception of power supply voltage both C and E

are functionally compatible with each other.

The MachXO3L/LF PLDs are available in a broad range of advanced halogen-free packages ranging from the space saving

2.5 x 2.5 mm WLCSP to the 19 x 19 mm caBGA. MachXO3L/LF devices support density migration within the same package.

Table 1.1 shows the LUT densities, package and I/O options, along with other key parameters.

The MachXO3L/LF devices offer enhanced I/O features  such as drive strength control, slew rate control, PCI compatibility,

bus-keeper latches, pull-up resistors, pull-down resistors, open drain outputs and hot socketing. Pull-up, pull-down and

bus-keeper features are controllable on a “per-pin” basis. A user-programmable internal oscillator is included in

MachXO3L/LF devices. The clock output from this oscillator may be divided by the timer/counter for use as clock input in

functions such as LED control, keyboard scanner and similar state machines.

The MachXO3L/LF devices also provide flexible, reliable and secure configuration from on-chip NVCM/Flash. These

devices can also configure themselves from external SPI Flash or be configured by an external master through the JTAG

test access port or through the I²C port. Additionally, MachXO3L/LF devices support dual-boot capability (using external

Flash memory) and remote field upgrade (TransFR) capability.

Lattice provides a variety of design tools that allow complex designs to be efficiently implemented using the

MachXO3L/LF family of devices. Popular logic synthesis tools provide synthesis library support for MachXO3L/LF. Lattice

design tools use the synthesis tool output along with the user-specified preferences and constraints to place and route

the design in the MachXO3L/LF device. These tools extract the timing from the routing and back-annotate it into the

design for timing verification.

Lattice provides many pre-engineered IP (Intellectual Property) LatticeCORE™ modules, including a number of reference

designs licensed free of charge, optimized for the MachXO3L/LF PLD family. By using these configurable soft core IP

cores as standardized blocks, users are free to concentrate on the unique aspects of their design, increasing their

productivity.

Features

• Solutions

      Smallest footprint, lowest power, high data throughput bridging solutions for mobile applications

      Optimized footprint, logic density, I/O count, I/O performance devices for I/O management and logic applications

      High I/O logic, lowest cost I/O, high I/O devices for I/O expansion applications

• Flexible Architecture

      Logic Density ranging from 64 to 9.4 k LUT4

      High I/O to LUT ratio with up to 384 I/O pins

• Advanced Packaging

      0.4 mm pitch: 1 k to 4 k densities in very small footprint WLCSP (2.5 mm × 2.5 mm to 3.8 mm × 3.8 mm) with 28 to

      63 I/O

      0.5 mm pitch: 640 to 9.4 k LUT densities in 6 mm x 6 mm to 10 mm x 10 mm BGA packages with up to281 I/O

      0.8 mm pitch: 1 k to 9.4 k densities with up to 384 I/O in BGA packages

• Pre-Engineered Source Synchronous I/O

      DDR registers in I/O cells

      Dedicated gearing logic

      7:1 Gearing for Display I/O

      Generic DDR, DDRx2, DDRx4

• High Performance, Flexible I/O Buffer

      Programmable sysI/O™ buffer supports wide range of interfaces:

            LVCMOS 3.3/2.5/1.8/1.5/1.2

            LVTTL

            LVDS, Bus-LVDS, MLVDS, LVPECL

            MIPI D-PHY Emulated

            Schmitt trigger inputs, up to 0.5 V hysteresis

      Ideal for I/O bridging applications

      I/O support hot socketing

      On-chip differential termination

      Programmable pull-up or pull-down mode

• Flexible On-Chip Clocking

      Eight primary clocks

      Up to two edge clocks for high-speed I/O interfaces (top and bottom sides only)

      Up to two analog PLLs per device with fractional-n frequency synthesis

            Wide input frequency range (7 MHz to 400 MHz).

• Non-volatile, Multi-time Programmable

      Instant-on

            Powers up in microseconds

      Optional dual boot with external SPI memory

      Single-chip, secure solution

      Programmable through JTAG, SPI or I2C

      MachXO3L includes multi-time programmable NVCM

      MachXO3LF reconfigurable Flash includes 100,000 write/erase cycle for commercial/industrial devices and 10,000 for

      automotive devices

      Supports background programming of non volatile memory

• TransFR Reconfiguration

      In-field logic update while I/O holds the system state

• Enhanced System Level Support

      On-chip hardened functions: SPI, I2C, timer/counter

      On-chip oscillator with 5.5% accuracy for commercial/industrial devices

      Unique TraceID for system tracking

      Single power supply with extended operatingrange

      IEEE Standard 1149.1 boundary scan

      IEEE 1532 compliant in-system programming

• Applications

      Consumer Electronics

      Compute and Storage

      Wireless Communications

      Industrial Control Systems

      Automotive System

• Low Cost Migration Path

      Migration from the Flash based MachXO3LF to the NVCM based MachXO3L

      Pin compatible and equivalent timing

How to choose FPGA for your project?

PDF

MachXO3 Field Programmable Gate Array (FPGA) IC 100 94208 4320 121-VFBGA, CSPBGA

General Description

MachXO3™ device family is an Ultra-Low Density family that supports the most advanced programmable bridging and

I/O expansion. It has the breakthrough I/O density and the lowest cost per I/O. The device I/O features have the

integrated support for latest industry standard I/O.

The MachXO3L/LF family of low power, instant-on, non-volatile PLDs has five devices with densities ranging from 640 to

9400 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices feature Embedded

Block RAM (EBR), Distributed RAM, Phase Locked Loops (PLLs), pre-engineered source synchronous I/O support, advanced

configuration support including dual-boot capability and hardened versions of commonly used functions such as SPI

controller, I2C controller and timer/counter. MachXO3LF devices also support User Flash Memory (UFM). These features

allow these devices to be used in low cost, high volume applications such as consumer electronics, compute and storage,

wireless communications, industrial control, and automotive systems.

The MachXO3L/LF devices are designed on a 65 nm non-volatile low power process. The device architecture has several

features such as programmable low swing differential I/O and the ability to turn off I/O banks, on-chip PLLs and

oscillators dynamically. These features help manage static and dynamic power consumption resulting in low static power

for all members of the family.

The MachXO3L/LF devices are available in two versions C and E with two speed grades: -5 and -6, with -6 being the

fastest. C devices have an internal linear voltage regulator which supports external VCC supply voltages of 3.3 V or 2.5 V.

E devices only accept 1.2 V as the external VCC supply voltage. With the exception of power supply voltage both C and E

are functionally compatible with each other.

The MachXO3L/LF PLDs are available in a broad range of advanced halogen-free packages ranging from the space saving

2.5 x 2.5 mm WLCSP to the 19 x 19 mm caBGA. MachXO3L/LF devices support density migration within the same package.

Table 1.1 shows the LUT densities, package and I/O options, along with other key parameters.

The MachXO3L/LF devices offer enhanced I/O features  such as drive strength control, slew rate control, PCI compatibility,

bus-keeper latches, pull-up resistors, pull-down resistors, open drain outputs and hot socketing. Pull-up, pull-down and

bus-keeper features are controllable on a “per-pin” basis. A user-programmable internal oscillator is included in

MachXO3L/LF devices. The clock output from this oscillator may be divided by the timer/counter for use as clock input in

functions such as LED control, keyboard scanner and similar state machines.

The MachXO3L/LF devices also provide flexible, reliable and secure configuration from on-chip NVCM/Flash. These

devices can also configure themselves from external SPI Flash or be configured by an external master through the JTAG

test access port or through the I²C port. Additionally, MachXO3L/LF devices support dual-boot capability (using external

Flash memory) and remote field upgrade (TransFR) capability.

Lattice provides a variety of design tools that allow complex designs to be efficiently implemented using the

MachXO3L/LF family of devices. Popular logic synthesis tools provide synthesis library support for MachXO3L/LF. Lattice

design tools use the synthesis tool output along with the user-specified preferences and constraints to place and route

the design in the MachXO3L/LF device. These tools extract the timing from the routing and back-annotate it into the

design for timing verification.

Lattice provides many pre-engineered IP (Intellectual Property) LatticeCORE™ modules, including a number of reference

designs licensed free of charge, optimized for the MachXO3L/LF PLD family. By using these configurable soft core IP

cores as standardized blocks, users are free to concentrate on the unique aspects of their design, increasing their

productivity.

Features

• Solutions

      Smallest footprint, lowest power, high data throughput bridging solutions for mobile applications

      Optimized footprint, logic density, I/O count, I/O performance devices for I/O management and logic applications

      High I/O logic, lowest cost I/O, high I/O devices for I/O expansion applications

• Flexible Architecture

      Logic Density ranging from 64 to 9.4 k LUT4

      High I/O to LUT ratio with up to 384 I/O pins

• Advanced Packaging

      0.4 mm pitch: 1 k to 4 k densities in very small footprint WLCSP (2.5 mm × 2.5 mm to 3.8 mm × 3.8 mm) with 28 to

      63 I/O

      0.5 mm pitch: 640 to 9.4 k LUT densities in 6 mm x 6 mm to 10 mm x 10 mm BGA packages with up to281 I/O

      0.8 mm pitch: 1 k to 9.4 k densities with up to 384 I/O in BGA packages

• Pre-Engineered Source Synchronous I/O

      DDR registers in I/O cells

      Dedicated gearing logic

      7:1 Gearing for Display I/O

      Generic DDR, DDRx2, DDRx4

• High Performance, Flexible I/O Buffer

      Programmable sysI/O™ buffer supports wide range of interfaces:

            LVCMOS 3.3/2.5/1.8/1.5/1.2

            LVTTL

            LVDS, Bus-LVDS, MLVDS, LVPECL

            MIPI D-PHY Emulated

            Schmitt trigger inputs, up to 0.5 V hysteresis

      Ideal for I/O bridging applications

      I/O support hot socketing

      On-chip differential termination

      Programmable pull-up or pull-down mode

• Flexible On-Chip Clocking

      Eight primary clocks

      Up to two edge clocks for high-speed I/O interfaces (top and bottom sides only)

      Up to two analog PLLs per device with fractional-n frequency synthesis

            Wide input frequency range (7 MHz to 400 MHz).

• Non-volatile, Multi-time Programmable

      Instant-on

            Powers up in microseconds

      Optional dual boot with external SPI memory

      Single-chip, secure solution

      Programmable through JTAG, SPI or I2C

      MachXO3L includes multi-time programmable NVCM

      MachXO3LF reconfigurable Flash includes 100,000 write/erase cycle for commercial/industrial devices and 10,000 for

      automotive devices

      Supports background programming of non volatile memory

• TransFR Reconfiguration

      In-field logic update while I/O holds the system state

• Enhanced System Level Support

      On-chip hardened functions: SPI, I2C, timer/counter

      On-chip oscillator with 5.5% accuracy for commercial/industrial devices

      Unique TraceID for system tracking

      Single power supply with extended operatingrange

      IEEE Standard 1149.1 boundary scan

      IEEE 1532 compliant in-system programming

• Applications

      Consumer Electronics

      Compute and Storage

      Wireless Communications

      Industrial Control Systems

      Automotive System

• Low Cost Migration Path

      Migration from the Flash based MachXO3LF to the NVCM based MachXO3L

      Pin compatible and equivalent timing

How to choose FPGA for your project?

PDF

MachXO2 Field Programmable Gate Array (FPGA) IC 79 75776 2112 100-LQFP

General Description

The MachXO2 family of ultra low power, instant-on, non-volatile PLDs has six devices with densities ranging from 256 to

6864 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices feature Embedded

Block RAM (EBR), Distributed RAM, User Flash Memory (UFM), Phase Locked Loops (PLLs), preengineered source

synchronous I/O support, advanced configuration support including dual-boot capability and hardened versions of

commonly used functions such as SPI controller, I²C controller and timer/counter. These features allow these devices to

be used in low cost, high volume consumer and system applications.

The MachXO2 devices are designed on a 65 nm non-volatile low power process. The device architecture has several

features such as programmable low swing differential I/Os and the ability to turn off I/O banks, on-chip PLLs and

oscillators dynamically. These features help manage static and dynamic power consumption resulting in low static power

for all members of the family.

The MachXO2 devices are available in two versions – ultra low power (ZE) and high performance (HC and HE) devices.

The ultra low power devices are offered in three speed grades –1, –2 and –3, with –3 being the fastest. Similarly, the

high-performance devices are offered in three speed grades: –4, –5 and –6, with –6 being the fastest. HC devices have an

internal linear voltage regulator which supports external VCC supply voltages of 3.3 V or 2.5 V. ZE and HE devices only

accept 1.2 V as the external VCC supply voltage. With the exception of power supply voltage all three types of devices

(ZE, HC and HE) are functionally compatible and pin compatible with each other.

The MachXO2 PLDs are available in a broad range of advanced halogen-free packages ranging from the space saving

2.5 mm x 2.5 mm WLCSP to the 23 mm x 23 mm fpBGA. MachXO2 devices support density migration within the same

package. Table 1-1 shows the LUT densities, package and I/O options, along with other key parameters.

The pre-engineered source synchronous logic implemented in the MachXO2 device family supports a broad range of

interface standards, including LPDDR, DDR, DDR2 and 7:1 gearing for display I/Os.

The MachXO2 devices offer enhanced I/O features such as drive strength control, slew rate control, PCI compati bility,

bus-keeper latches, pull-up resistors, pull-down resistors, open drain outputs and hot socketing. Pull-up, pull-down and

bus-keeper features are controllable on a“per-pin”basis.

A user-programmable internal oscillator is included in MachXO2 devices. The clock output from this oscillator may be

divided by the timer/counter for use as clock input in functions such as LED control, key-board scanner and sim-ilar state

machines.

The MachXO2 devices also provide flexible, reliable and secure configuration from on-chip Flash memory. These devices

can also configure themselves from external SPI Flash or be configured by an external master through the JTAG test

access port or through the I2C port. Additionally, MachXO2 devices support dual-boot capability (using external Flash

memory) and remote field upgrade (TransFR) capability.

Lattice provides a variety of design tools that allow complex designs to be efficiently implemented using the MachXO2

family of devices. Popular logic synthesis tools provide synthesis library support for MachXO2. Lattice design tools use the

synthesis tool output along with the user-specified preferences and constraints to place and route the design in the

MachXO2 device. These tools extract the timing from the routing and back-annotate it intothe design for timing

verification.

Lattice provides many pre-engineered IP (Intellectual Property) LatticeCORE™ modules, including a number of reference

designs licensed free of charge, optimized for the MachXO2 PLD family. By using these configurable soft core IP cores as

standardized blocks, users are free to concentrate on the unique aspects of their design, increasing their productivity.

Features

• Flexible Logic Architecture

      Six devices with 256 to 6864 LUT4s and 18 to 334 I/Os

• Ultra Low Power Devices

      Advanced 65 nm low power process

      As low as 22 µW standby power

      Programmable low swing differential I/Os

      Stand-by mode and other power saving options

• Embedded and Distributed Memory

      Up to 240 kbits sysMEM™ Embedded BlockRAM

      Up to 54 kbits Distributed RAM

      Dedicated FIFO control logic

• On-Chip User Flash Memory

      Up to 256 kbits of User Flash Memory

      100,000 write cycles

      Accessible through WISHBONE, SPI, I2C and JTAG interfaces

      Can be used as soft processor PROM or as Flash memory

• Pre-Engineered Source Synchronous I/O

      DDR registers in I/O cells

      Dedicated gearing logic

      7:1 Gearing for Display I/Os

      Generic DDR, DDRX2, DDRX4

      Dedicated DDR/DDR2/LPDDR memory with DQS support

• High Performance, Flexible I/O Buffer

      Programmable sysIO™ buffer supports wide range of interfaces:

      – LVCMOS 3.3/2.5/1.8/1.5/1.2

      – LVTTL

      – PCI

      – LVDS, Bus-LVDS, MLVDS, RSDS, LVPECL

      – SSTL 25/18

      – HSTL 18

      – Schmitt trigger inputs, up to 0.5 V hysteresis

      I/Os support hot socketing

      On-chip differential termination

      Programmable pull-up or pull-down mode

• Flexible On-Chip Clocking

      Eight primary clocks

      Up to two edge clocks for high-speed I/O interfaces (top and bottom sides only)

      Up to two analog PLLs per device with fractional-n frequency synthesis

      – Wide input frequency range (7 MHz to 400 MHz)

• Non-volatile, Infinitely Reconfigurable

      Instant-on – powers up in microseconds

      Single-chip, secure solution

      Programmable through JTAG, SPI or I²C

      Supports background programming of non-vola-tile memory

      Optional dual boot with external SPI memory

• TransFR™ Reconfiguration

      In-field logic update while system operates

• Enhanced System Level Support

      On-chip hardened functions: SPI, I²C, timer/counter

      On-chip oscillator with 5.5% accuracy

      Unique TraceID for system tracking

      One Time Programmable (OTP) mode

      Single power supply with extended operating range

      IEEE Standard 1149.1 boundary scan

      IEEE 1532 compliant in-system programming

• Broad Range of Package Options

      TQFP, WLCSP, ucBGA, csBGA, caBGA, ftBGA, fpBGA, QFN package options

      Small footprint package options

      – As small as 2.5 mm x 2.5 mm

      Density migration supported

      Advanced halogen-free packaging

How to choose FPGA for your project?

PDF

MachXO3 Field Programmable Gate Array (FPGA) IC 206 442368 9400 256-LFBGA

General Description

MachXO3™ device family is an Ultra-Low Density family that supports the most advanced programmable bridging and

I/O expansion. It has the breakthrough I/O density and the lowest cost per I/O. The device I/O features have the

integrated support for latest industry standard I/O.

The MachXO3L/LF family of low power, instant-on, non-volatile PLDs has five devices with densities ranging from 640 to

9400 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices feature Embedded

Block RAM (EBR), Distributed RAM, Phase Locked Loops (PLLs), pre-engineered source synchronous I/O support, advanced

configuration support including dual-boot capability and hardened versions of commonly used functions such as SPI

controller, I2C controller and timer/counter. MachXO3LF devices also support User Flash Memory (UFM). These features

allow these devices to be used in low cost, high volume applications such as consumer electronics, compute and storage,

wireless communications, industrial control, and automotive systems.

The MachXO3L/LF devices are designed on a 65 nm non-volatile low power process. The device architecture has several

features such as programmable low swing differential I/O and the ability to turn off I/O banks, on-chip PLLs and

oscillators dynamically. These features help manage static and dynamic power consumption resulting in low static power

for all members of the family.

The MachXO3L/LF devices are available in two versions C and E with two speed grades: -5 and -6, with -6 being the

fastest. C devices have an internal linear voltage regulator which supports external VCC supply voltages of 3.3 V or 2.5 V.

E devices only accept 1.2 V as the external VCC supply voltage. With the exception of power supply voltage both C and E

are functionally compatible with each other.

The MachXO3L/LF PLDs are available in a broad range of advanced halogen-free packages ranging from the space saving

2.5 x 2.5 mm WLCSP to the 19 x 19 mm caBGA. MachXO3L/LF devices support density migration within the same package.

Table 1.1 shows the LUT densities, package and I/O options, along with other key parameters.

The MachXO3L/LF devices offer enhanced I/O features  such as drive strength control, slew rate control, PCI compatibility,

bus-keeper latches, pull-up resistors, pull-down resistors, open drain outputs and hot socketing. Pull-up, pull-down and

bus-keeper features are controllable on a “per-pin” basis. A user-programmable internal oscillator is included in

MachXO3L/LF devices. The clock output from this oscillator may be divided by the timer/counter for use as clock input in

functions such as LED control, keyboard scanner and similar state machines.

The MachXO3L/LF devices also provide flexible, reliable and secure configuration from on-chip NVCM/Flash. These

devices can also configure themselves from external SPI Flash or be configured by an external master through the JTAG

test access port or through the I²C port. Additionally, MachXO3L/LF devices support dual-boot capability (using external

Flash memory) and remote field upgrade (TransFR) capability.

Lattice provides a variety of design tools that allow complex designs to be efficiently implemented using the

MachXO3L/LF family of devices. Popular logic synthesis tools provide synthesis library support for MachXO3L/LF. Lattice

design tools use the synthesis tool output along with the user-specified preferences and constraints to place and route

the design in the MachXO3L/LF device. These tools extract the timing from the routing and back-annotate it into the

design for timing verification.

Lattice provides many pre-engineered IP (Intellectual Property) LatticeCORE™ modules, including a number of reference

designs licensed free of charge, optimized for the MachXO3L/LF PLD family. By using these configurable soft core IP

cores as standardized blocks, users are free to concentrate on the unique aspects of their design, increasing their

productivity.

Features

• Solutions

      Smallest footprint, lowest power, high data throughput bridging solutions for mobile applications

      Optimized footprint, logic density, I/O count, I/O performance devices for I/O management and logic applications

      High I/O logic, lowest cost I/O, high I/O devices for I/O expansion applications

• Flexible Architecture

      Logic Density ranging from 64 to 9.4 k LUT4

      High I/O to LUT ratio with up to 384 I/O pins

• Advanced Packaging

      0.4 mm pitch: 1 k to 4 k densities in very small footprint WLCSP (2.5 mm × 2.5 mm to 3.8 mm × 3.8 mm) with 28 to

      63 I/O

      0.5 mm pitch: 640 to 9.4 k LUT densities in 6 mm x 6 mm to 10 mm x 10 mm BGA packages with up to281 I/O

      0.8 mm pitch: 1 k to 9.4 k densities with up to 384 I/O in BGA packages

• Pre-Engineered Source Synchronous I/O

      DDR registers in I/O cells

      Dedicated gearing logic

      7:1 Gearing for Display I/O

      Generic DDR, DDRx2, DDRx4

• High Performance, Flexible I/O Buffer

      Programmable sysI/O™ buffer supports wide range of interfaces:

            LVCMOS 3.3/2.5/1.8/1.5/1.2

            LVTTL

            LVDS, Bus-LVDS, MLVDS, LVPECL

            MIPI D-PHY Emulated

            Schmitt trigger inputs, up to 0.5 V hysteresis

      Ideal for I/O bridging applications

      I/O support hot socketing

      On-chip differential termination

      Programmable pull-up or pull-down mode

• Flexible On-Chip Clocking

      Eight primary clocks

      Up to two edge clocks for high-speed I/O interfaces (top and bottom sides only)

      Up to two analog PLLs per device with fractional-n frequency synthesis

            Wide input frequency range (7 MHz to 400 MHz).

• Non-volatile, Multi-time Programmable

      Instant-on

            Powers up in microseconds

      Optional dual boot with external SPI memory

      Single-chip, secure solution

      Programmable through JTAG, SPI or I2C

      MachXO3L includes multi-time programmable NVCM

      MachXO3LF reconfigurable Flash includes 100,000 write/erase cycle for commercial/industrial devices and 10,000 for

      automotive devices

      Supports background programming of non volatile memory

• TransFR Reconfiguration

      In-field logic update while I/O holds the system state

• Enhanced System Level Support

      On-chip hardened functions: SPI, I2C, timer/counter

      On-chip oscillator with 5.5% accuracy for commercial/industrial devices

      Unique TraceID for system tracking

      Single power supply with extended operatingrange

      IEEE Standard 1149.1 boundary scan

      IEEE 1532 compliant in-system programming

• Applications

      Consumer Electronics

      Compute and Storage

      Wireless Communications

      Industrial Control Systems

      Automotive System

• Low Cost Migration Path

      Migration from the Flash based MachXO3LF to the NVCM based MachXO3L

      Pin compatible and equivalent timing

How to choose FPGA for your project?

PDF

CrossLink-NX™ Field Programmable Gate Array (FPGA) IC 72 1548288 39000 121-VFBGA, CSPBGA

General Description

CrossLink™-NX family of low-power FPGAs can be used in a wide range of applications, and are optimized for bridging and

processing needs in Embedded Vision applications – supporting a variety of high bandwidth sensor and display interfaces,

video processing and machine learning inferencing. It is built on Lattice Nexus FPGA platform, using low-power 28 nm

FD-SOI technology. It combines the extreme flexibility of an FPGA with the low power and high reliability (due to extremely

low SER) of FD-SOI technology, and offers small footprint package options.

CrossLink-NX supports a variety of interfaces including MIPI D-PHY (CSI-2, DSI), LVDS, SLVS, subLVDS, PCI Express (Gen1,

Gen2), SGMII (Gigabit Ethernet), and more.

Processing features of CrossLink-NX include up to 39K Logic Cells, 56 18x18 multipliers, 2.9 Mb of embedded memory

(consisting of EBR and LRAM blocks), distributed memory, DRAM interfaces (supporting DDR3, DDR3L, LPDDR2, and

LPDDR3 up to 1066 Mbps x16 data width).

CrossLink-NX FPGAs support fast configuration of its reconfigurable SRAM-based logic fabric, and ultra-fast configuration

(in under 3 ms) of its programmable sysI/O™. Security features to secure user designs include bitstream encryption and

password protection. In addition to the high reliability inherent to FD-SOI technology (due to its extremely low SER), active

reliability features such as built-in frame-based SED/SEC (for SRAM-based logic fabric), and ECC (for EBR and LRAM) are

also supported. Built-in ADC is available in each device for system monitoring functions.

Lattice Radiant™ design software allows large complex user designs to be efficiently implemented on CrossLink-NX FPGA

family. Synthesis library support for CrossLink-NX devices is available for popular logic synthesis tools. Radiant tools use the

synthesis tool output along with constraints from its floor planning tools, to place and route the user design in

CrossLink-NX device. The tools extract timing from the routing, and back-annotate it into the design for timing verification.

Lattice provides many pre-engineered IP (Intellectual Property) modules for CrossLink-NX family. By using these

configurable soft IP cores as standardized blocks, you are free to concentrate on the unique aspects of your design,

increasing your productivity.

Features

• Programmable Architecture

      17K to 39K logic cells

      24 to 56 18 x 18 multipliers (in sysDSP™ blocks)

      2.5 to 2.9 Mb of embedded memory blocks (EBR, LRAM)

      36 to 192 programmable sysI/O (High Performance and Wide Range I/O)

• MIPI D-PHY

      Up to two hardened 4-lane MIPI D-PHY interfaces

            Up to eight lanes total

            Transmit or receive

            Supports CSI-2, DSI

            20 Gbps aggregate bandwidth

            2.5 Gbps per lane, 10 Gbps per D-PHY interface

      Additional Soft D-PHY interfaces supported by High Performance (HP) sysI/O

            Transmit or receive

            Supports CSI-2, DSI

            Up to 1.5 Gbps per lane

• Programmable sysI/O supports wide variety of interfaces

      High Performance (HP) on bottom I/O dual rank

            Supports up to 1.8 V VCCIO

            Mixed voltage support (1.0 V, 1.2 V, 1.5 V, 1.8 V)

            High-speed differential up to 1.5 Gbps

            Supports soft D-PHY (Tx/Rx), LVDS 7:1 (Tx/Rx), SLVS (Tx/Rx), subLVDS (Rx)

            Supports SGMII (Gb Ethernet) – 2 channels (Tx/Rx) at 1.25 Gbps

            Dedicated DDR3/DDR3L and LPDDR2/LPDDR3 memory support with DQS logic, up to 1066 Mbps data-rate and

            x16 data-width

      Wide Range (WR) on Left, Right and Top I/O Banks

            Supports up to 3.3 V VCCIO

            Mixed voltage support (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V)

            Programmable slew rate (slow, med, fast)

            Controlled impedance mode

            Emulated LVDS support

            Hot-socketing

• Power Modes – Low Power versus High Performance

      User selectable

      Low-Power mode for power and/or thermal challenges

      High-Performance mode for faster processing

• Small footprint package options

      4 x 4 mm2to 10 x 10 mm2 package options

• 2x SGMII CDR at up to 1.25 Gbps – to support 2 channels SGMII using HP I/O

      CDR for RX

      8b/10b decoding

      Independent Loss of Lock (LOL) detector for each CDR block

• sysCLOCK™ analog PLLs

      Three in 39K LC and two in 17K LC device

      Six outputs per PLL

      Fractional N

      Programmable and dynamic phase control

• sysDSP Enhanced DSP blocks

      Hardened pre-adder

      Dynamic Shift for AI/ML support

      Four 18 x 18, eight 9 x 9, two 18 x 36, or 36 x 36

      Advanced 18 x 36, two 18 x 18, or four 8 x 8 MAC

• Flexible memory resources

      Up to 1.5 Mb sysMEM™ Embedded Block RAM EBR)

      Programmable width

      ECC

      FIFO

      80k to 240k bits distributed RAM

      Large RAM Blocks

            0.5 Mbits per block

            Up to five blocks (2.5 Mb total) per device

• SERDES – PCIe Gen2 x1 channel (Tx/Rx) hard IP in 39K LC device

      Hard IP supports

            Gen1, Gen2, Multi-Function, End Point, Root Complex

            APB control bus

            AHB-Lite for data bus

• Internal bus interface support

      APB control bus

      AHB-Lite for data bus

      AXI4-streaming 

• Configuration – Fast, Secure

      SPI – x1, x2, x4 up to 150 MHz

            Master and Slave SPI support

      JTAG

      I²C and I3C

      Ultrafast I/O configuration for instant-on support

      Less than 15 ms full device configuration for LIFCL-40

      Bitstream Security

            Encryption

• Cryptographic engine

      Bitstream encryption – using AES-256

      Bitstream authentication – using ECDSA

      Hashing algorithms – SHA, HMAC

      True Random Number Generator

      AES 128/256 Encryption

• Single Event Upset (SEU) Mitigation Support

      Extremely low Soft Error Rate (SER) due to FD SOI technology

      Soft Error Detect – Embedded hard macro

      Soft Error Correction – Without stopping user operation

      Soft Error Injection – Emulate SEU event to debug system error handling

• ADC – 1 MSPS, 12-bit SAR

      2 ADCs per device

      3 Continuous-time Comparators

      Simultaneous sampling

• System Level Support

      IEEE 1149.1 and IEEE 1532 compliant

      Reveal Logic Analyzer

      On-chip oscillator for initialization and general use

      1.0 V core power supply

How to choose FPGA for your project?

PDF

Certus™-NX Field Programmable Gate Array (FPGA) IC 192 1548288 39000 256-LFBGA

General Description

The Certus™-NX family of low-power general purpose FPGAs can be used in a wide range of applications across multiple

markets, and are optimized for bridging and processing needs in Edge applications. It is built on the Lattice Nexus™ FPGA

platform, using low-power 28nm FD-SOI technology. It combines the extreme flexibility of an FPGA with the low power

and high reliability (due to extremely low SER) of FD-SOI technology, and offer small footprint package options with a high

amount of I/O per mm2. Design security features such as AES-256 encryption and ECDSA authentication are also

supported.

Certus-NX supports a variety of interfaces including PCI Express (Gen1, Gen2), SGMII (Gigabit Ethernet), LVDS, LVCMOS

(0.9–3.3 V), and more.

Processing features of Certus-NX include up to 39k Logic Cells, 56 18 × 18 multipliers, 2.9 Mb of embedded memory

(consisting of EBR and LRAM blocks), distributed memory, DRAM interfaces (supporting DDR3, DDR3L, LPDDR2, and

LPDDR3 up to 1066 Mbps × 16 data width).

Certus-NX FPGAs support fast configuration of its reconfigurable SRAM-based logic fabric, and ultra-fast configuration (in

under 3 ms) of its programmable sysI/O™. In addition to the high reliability inherent to FD-SOI technology (due to its

extremely low SER), active reliability features such as built-in frame-based SED/SEC (for SRAM-based logic fabric), and ECC

(for EBR and LRAM) are also supported. Dual 12-bit ADCs are available on-chip for system monitoring functions.

Lattice Radiant™ design software allows large complex user designs to be efficiently implemented on Certus-NX FPGA

family. Synthesis library support for Certus-NX devices is available for popular logic synthesis tools. Radiant tools use the

synthesis tool output along with constraints from its floor planning tools, to place and route the user design in Certus-NX

device. The tools extract timing from the routing, and back-annotate it into the design for timing verification.

Lattice provides many pre-engineered IP (Intellectual Property) modules for Certus-NX family. By using these configurable

soft IP cores as standardized blocks, you are free to concentrate on the unique aspects of your design, increasing your

productivity.

Features

• Programmable architecture

      17 k to 39 k logic cells

      24 to 56 18 × 18 multipliers (in sysDSP™ blocks)

      2.5 to 2.9 Mb of embedded memory blocks (EBR, LRAM)

      78 to 192 programmable sysI/O (High Performance and Wide Range I/O)

• Programmable sysI/O supports wide variety of interfaces

      High Performance (HP) I/O on bottom I/O banks

            Supports up to 1.8 V VCCIO

            Mixed voltage support (1.0 V, 1.2 V, 1.5 V, 1.8 V)

            High-speed differential up to 1.5 Gbps

            Supports LVDS, Soft D-PHY (Tx/Rx), LVDS 7:1 (Tx/Rx), SLVS (Tx/Rx), subLVDS (Rx)

            Supports SGMII (Gb Ethernet) – 2 channels (Tx/Rx) at 1.25 Gbps

            Dedicated DDR3/DDR3L and LPDDR2/LPDDR3 memory support with DQS logic, up to 1066 Mbps data-rate and

            x16 data-width

      Wide Range (WR) I/O on left, right, and top I/O Bank

            Supports up to 3.3 V VCCIO

            Mixed voltage support (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V)

            Programmable slew rate (slow, med, fast*)

            Controlled impedance mode

            Emulated LVDS support

            Hot-socketing

• Power modes – Low Power versus High Performance

      User selectable

      Low-Power mode for power and/or thermal challenges

      High-Performance mode for faster processing

• Small footprint package options

      6 mm × 6 mm package option in both densities

• 2x SGMII CDR at up to 1.25 Gbps – to support 2 channels SGMII using HP I/O

      CDR for RX

      10b/8b decoding

      Independent Loss of Lock (LOL) detector for each CDR block

*Note: Except caBGA196.

• sysCLOCK™ analog PLLs

      Three in 39k LC and two in 17k LC device

      Six outputs per PLL

      Fractional N

      Programmable and dynamic phase control

• sysDSP enhanced DSP blocks

      Hardened pre-adder

      Dynamic shift for AI/ML support

      Four 18 × 18, eight 9 × 9, two 18 × 36, or 36 × 36 multipliers

      Advanced 18 × 36, two 18 × 18, or four 8 × 8 MAC

• Flexible memory resources

      Up to 1.5 Mb sysMEM™ Embedded Block RAM (EBR)

      Programmable width

      ECC

      FIFO

      80k to 240k bits distributed RAM

      Large RAM Blocks

            0.5 Mbits per block

            Up to five blocks (2.5 Mb total) per device

• SerDes – PCIe Gen2 x1 channel (Tx/Rx) hard IP in 39k LC device

      PCIe hard IP supports

            Gen1 and Gen2

            Endpoint and Root complex

            Multi-function up to four functions

            x1 lane

• Internal bus interface support

      APB control bus

      AHB-Lite for data bus

      AXI4-streaming

• Configuration – Fast, Secure

      SPI – x1, x2, x4 up to 150 MHz

            Master and Slave SPI support

      JTAG

      I2C and I3C

      Ultrafast I/O configuration for instant-on support

      Less than 15 ms full device configuration for LFD2NX-40

• Cryptographic engine

      Bitstream encryption – using AES-256

      Bitstream authentication – using ECDSA

      Hashing algorithms – SHA, HMAC

      True Random Number Generator

      AES 128/256 Encryption

• Single Event Upset (SEU) Mitigation Support

      Extremely low Soft Error Rate (SER) due to FD-SOI technology

      Soft Error Detect – Embedded hard macro

      Soft Error Correction – Without stopping user operation

      Soft Error Injection – Emulate SEU event to debug system error handling

• ADC – 1 MSPS, 12-bit SAR

      Two ADCs per device

      Three Continuous-time Comparators

      Simultaneous sampling

• System level support

      IEEE 1149.1 and IEEE 1532 compliant

      Reveal Logic Analyzer

      On-chip oscillator for initialization and general use

      1.0 V core power supply

How to choose FPGA for your project?

PDF