FIRST ORDER
FREE 10% DISCOUNT

|
Img
|
Pdf
|
Part Number
|
Manufacturers
|
Desc
|
In Stock
|
Packing
|
Rfq
|
||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
12V1 HCS12 Microcontroller IC 16-Bit 25MHz 48KB (48K x 8) FLASH 32-LQFP (7x7)
|
1331
|
32-LQFP
|
|
||||||||||||||||||||||||||||||||||||
|
Zener Diode 5.6 V 310 mW ±2% Surface Mount SOD-323F
|
8364
|
SC-90, SOD-323F
|
|
||||||||||||||||||||||||||||||||||||
|
Buffer, Non-Inverting 2 Element 1 Bit per Element 3-State Output 8-XSON, SOT833-1 (1.95x1)
|
173
|
8-XFDFN
|
|
||||||||||||||||||||||||||||||||||||
|
* Microcontroller IC
|
3390
|
|
|||||||||||||||||||||||||||||||||||||
|
HC08 HC08 Microcontroller IC 8-Bit 8MHz 60KB (60K x 8) FLASH 48-LQFP (7x7)
|
9499
|
48-LQFP
|
|
||||||||||||||||||||||||||||||||||||
|
MPC8xx Microprocessor IC MPC8xx 1 Core, 32-Bit 66MHz 357-PBGA (25x25)
|
3004
|
357-BBGA
|
|
||||||||||||||||||||||||||||||||||||
|
ColdFire® Embedded Module ColdFire V4e, MCF5475 266MHz 64MB 2MB (Boot)
|
4259
|
|
|||||||||||||||||||||||||||||||||||||
|
ARM® Cortex®-M3 LPC13xx Microcontroller IC 32-Bit Single-Core 72MHz 32KB (32K x 8) FLASH 32-HVQFN (7x7)
What are the most common mistakes made when sourcing electronic component? | ICONECHIPFor more product unboxing videos, please click on the link
|
6686
|
32-VQFN Exposed Pad
|
|
||||||||||||||||||||||||||||||||||||
|
Converter Offline Flyback Topology 65kHz SC-74
|
9881
|
SC-74, SOT-457
|
|
||||||||||||||||||||||||||||||||||||
|
CAR DSP
|
4292
|
|
|||||||||||||||||||||||||||||||||||||
|
Microprocessor IC *
|
7928
|
|
|||||||||||||||||||||||||||||||||||||
|
N-Channel 75 V 181A (Tc) 300W (Tc) Surface Mount D2PAK-7
|
8843
|
TO-263-7, D²Pak (6 Leads + Tab)
|
|
||||||||||||||||||||||||||||||||||||
|
Channel 8-TSSOP
How do you identify which pin is pin 1 of an IC integrated circuit chip? |ICONECHIPFor more product unboxing videos, please click on the link
|
8865
|
8-TSSOP, 8-MSOP (0.118
|
|
||||||||||||||||||||||||||||||||||||
|
HC08 HC08 Microcontroller IC 8-Bit 8MHz 4KB (4K x 8) FLASH 20-SOIC
|
9939
|
20-SOIC (0.295", 7.50mm Width)
|
|
||||||||||||||||||||||||||||||||||||
|
RF Mosfet 32 V 200 mA 860MHz 18.2dB 75W NI-360S
|
2714
|
NI-360S
|
|
||||||||||||||||||||||||||||||||||||
|
System Basis Chip PMIC 32-LQFP (7x7)
|
2835
|
32-LQFP
|
|
||||||||||||||||||||||||||||||||||||
|
RF Transistor NPN 10V 40mA 55GHz 136mW Surface Mount 4-DFP
|
1
|
SOT-343F
|
|
||||||||||||||||||||||||||||||||||||
|
ARM® Cortex®-M4/M0 LPC43xx Microcontroller IC 32-Bit Dual-Core 204MHz 1MB (1M x 8) FLASH 208-LQFP (28x28)
What are the most common mistakes made when sourcing electronic component? | ICONECHIPFor more product unboxing videos, please click on the link
|
8027
|
208-LQFP
|
|
||||||||||||||||||||||||||||||||||||
|
Converter Offline Topology 10MHz 10-SO
|
9543
|
10-SOIC (0.154", 3.90mm Width)
|
|
||||||||||||||||||||||||||||||||||||
|
AND Gate IC 3 Channel 14-SSOP
|
1037
|
14-SSOP (0.209", 5.30mm Width)
|
|
||||||||||||||||||||||||||||||||||||
|
Diode Array 1 Pair Common Cathode 30 V 200mA (DC) Surface Mount TO-236-3, SC-59, SOT-23-3
|
4069
|
TO-236-3, SC-59, SOT-23-3
|
|
||||||||||||||||||||||||||||||||||||
|
HCS12X HCS12X Microcontroller IC 16-Bit 80MHz 512KB (512K x 8) FLASH 144-LQFP (20x20) Introduction The MC9S12XD family will retain the low cost, power consumption, EMC and code-size efficiency advantages currently enjoyed by users of Freescale's existing 16-Bit MC9S12 MCU Family. Based around an enhanced S12 core, the MC9S12XD family will deliver 2 to 5 times the performance of a 25-MHz S12 whilst retaining a high degree of pin and code compatibility with the S12. The MC9S12XD family introduces the performance boosting XGATE module. Using enhanced DMA functionality, this parallel processing module offloads the CPU by providing high-speed data processing and transfer between peripheral modules, RAM, Flash EEPROM and I/O ports. Providing up to 80 MIPS of performance additional to the CPU, the XGATE can access all peripherals, Flash EEPROM and the RAM block. The MC9S12XD family is composed of standard on-chip peripherals including up to 512 Kbytes of Flash EEPROM, 32 Kbytes of RAM, 4 Kbytes of EEPROM, six asynchronous serial communications interfaces (SCI), three serial peripheral interfaces (SPI), an 8-channel IC/OC enhanced capture timer, an 8-channel, 10-bit analog-to-digital converter, a 16-channel, 10-bit analog-to-digital converter, an 8-channel pulse-width modulator (PWM), five CAN 2.0 A, B software compatible modules (MSCAN12), two inter-IC bus blocks, and a periodic interrupt timer. The MC9S12XD family has full 16-bit data paths throughout. The non-multiplexed expanded bus interface available on the 144-pin versions allows an easy interface to external memories The inclusion of a PLL circuit allows power consumption and performance to be adjusted to suit operational requirements. System power consumption can be further improved with the new “fast exit from stop mode” feature. In addition to the I/O ports available in each module, up to 25 further I/O ports are available with interrupt capability allowing wake-up from stop or wait mode. Family members in 144-pin LQFP will be available with external bus interface and parts in 112-pin LQFP or 80-pin QFP package without external bus interface. See Appendix E Derivative Differencesfor package options. MC9S12XD/B/A Family Features • HCS12X Core — 16-bit HCS12X CPU – Upward compatible with MC9S12 instruction set – Interrupt stacking and programmer’s model identical to MC9S12 – Instruction queue – Enhanced indexed addressing – Enhanced instruction set — EBI (external bus interface) — MMC (module mapping control) — INT (interrupt controller) — DBG (debug module to monitor HCS12X CPU and XGATE bus activity) — BDM (background debug mode) • XGATE (peripheral coprocessor) — Parallel processing module off loads the CPU by providing high-speed data processing and transfer — Data transfer between Flash EEPROM, RAM, peripheral modules, and I/O ports • PIT (periodic interrupt timer) — Four timers with independent time-out periods — Time-out periods selectable between 1 and 224 bus clock cycles • CRG (clock and reset generator) — Low noise/low power Pierce oscillator — PLL — COP watchdog — Real time interrupt — Clock monitor — Fast wake-up from stop mode • Port H & Port J with interrupt functionality — Digital filtering — Programmable rising or falling edge trigger • Memory — 512, 256 and 128-Kbyte Flash EEPROM — 4 and 2-Kbyte EEPROM — 32, 16 and 12-Kbyte RAM • One 16-channel and one 8-channel ADC (analog-to-digital converter) — 10-bit resolution — External and internal conversion trigger capabilityFiveFourTwo 1M bit per second, CAN 2.0 A, B software compatible modules — Five receive and three transmit buffers — Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit, or 8 x 8 bit — Four separate interrupt channels for Rx, Tx, error, and wake-up — Low-pass filter wake-up function — Loop-back for self-test operation • ECT (enhanced capture timer) — 16-bit main counter with 7-bit prescaler — 8 programmable input capture or output compare channels — Four 8-bit or two 16-bit pulse accumulators • 8 PWM (pulse-width modulator) channels — Programmable period and duty cycle — 8-bit 8-channel or 16-bit 4-channel — Separate control for each pulse width and duty cycle — Center-aligned or left-aligned outputs — Programmable clock select logic with a wide range of frequencies — Fast emergency shutdown input • Serial interfaces — SixFourTwo asynchronous serial communication interfaces (SCI) with additional LIN support and selectable IrDA 1.4 return-to-zero-inverted (RZI) format with programmable pulse width — ThreeTwo Synchronous Serial Peripheral Interfaces (SPI) • TwoOne IIC (Inter-IC bus) Modules — Compatible with IIC bus standard — Multi-master operation — Software programmable for one of 256 different serial clock frequencies • On-Chip Voltage Regulator — Two parallel, linear voltage regulators with bandgap reference — Low-voltage detect (LVD) with low-voltage interrupt (LVI) — Power-on reset (POR) circuit — 3.3-V–5.5-V operation — Low-voltage reset (LVR) — Ultra low-power wake-up timer • 144-pin LQFP, 112-pin LQFP, and 80-pin QFP packages — I/O lines with 5-V input and drive capability — Input threshold on external bus interface inputs switchable for 3.3-V or 5-V operation — 5-V A/D converter inputs — Operation at 80 MHz equivalent to 40-MHz bus speed • Development support — Single-wire background debug™ mode (BDM) — Four on-chip hardware breakpoints NXP Electronics components unboxing,humidity card changed color chip can used? |
8676
|
144-LQFP
|
|
||||||||||||||||||||||||||||||||||||
|
HC11 HC11 Microcontroller IC 8-Bit 4MHz ROMless 68-PLCC (24.21x24.21)
|
6101
|
68-LCC (J-Lead)
|
|
||||||||||||||||||||||||||||||||||||
|
RF Mosfet 28 V 1 A 1.93GHz ~ 1.99GHz 13.9dB 22W NI-780S
|
8368
|
NI-780S
|
|
||||||||||||||||||||||||||||||||||||
|
Motor Driver CMOS Parallel 44-HSOP
|
4
|
44-BSSOP (0.433", 11.00mm Width) Exposed Pad
|
|
||||||||||||||||||||||||||||||||||||
|
Capacitive Touch Buttons 16-TSSOP
How do you identify which pin is pin 1 of an IC integrated circuit chip? |ICONECHIPFor more product unboxing videos, please click on the link
|
6871
|
16-TSSOP (0.173
|
|
||||||||||||||||||||||||||||||||||||
|
Bipolar Motor Driver CMOS Parallel 20-TSSOP
|
227
|
20-TSSOP (0.173", 4.40mm Width) Exposed Pad
|
|
||||||||||||||||||||||||||||||||||||
|
ARM® Cortex®-M4F S32K Microcontroller IC 32-Bit Single-Core 80MHz 512KB (512K x 8) FLASH 64-LQFP (10x10)
|
5928
|
64-LQFP
|
|
||||||||||||||||||||||||||||||||||||
|
Interface
|
1
|
|
|||||||||||||||||||||||||||||||||||||
|
Zener Diode Array 1 Pair Common Anode 47 V 300 mW ±2% SOT-23
|
21
|
TO-236-3, SC-59, SOT-23-3
|
|
||||||||||||||||||||||||||||||||||||